EPD Ireland
Data stock: Data that has been made publicly available

Process data set overview page

Data set: Altherm ICF 350mm Block (00.03.000)

Full name
Altherm ICF 350mm Block
Location
IE
Reference year
2026
Valid until
2031
Reference flow(s)
Type
EPD
Parameterized?
no
LCIA results included?
yes
Category
Synonyms
Use advice for data set
This LCA covers the Product (A1, A2 and A3), Construction (A4, A5) End of Life (C1 to C4) and Benefits/loads beyond the system boundary (D) Stages, as indicated above. This is termed: "Cradle to gate with options, modules C1 to C4, and module D". A schematic of Product stage (A1 - A3) is presented in the flow diagram below.
Data set use approval
General comment
Data quality: Time Representativeness: In this LCA the data relating to the usages, emissions and materials, and the data relating to the bespoke background processes for environmental impacts vary between up to 6 years and less than 2 years apart. The Ecoinvent database version 3.11 has been used. Time representativeness is considered to be Good. Geographical Representativeness: Data is from the area under study (Europe), where all the raw materials come from western Europe. The Geographical Representativeness is thus assumed to be Very Good. Technical Representativeness: Data is obtained directly from the processes and products under study in this LCA. The processes use electricity and diesel. The electricity record is for electricity generated by a mix of renewables and fossil fuel resources. The main raw material is EPS beads, and as noted in Time Representativeness for some of the raw materials there is more than 3 years differential between reference production year and time period for which the data are representative. Technical Representativeness is considered to be Good. Allocation: The measurement of environmental impacts in this EPD uses the LCIA methodologies recommended for PEF 3.1. In this EPD, the waste processes are allocated in the relevant module. In the case of the use of secondary materials or energy recovered from secondary fuels, the system boundary between the system under study and the previous system (providing the secondary materials) is set where outputs of the previous system, e.g. materials, products, building elements or energy, reach the end-of-waste state. The modularity and the polluter payer principles have been followed. Cut-off criteria: All relevant inputs and outputs - like emissions, energy and materials - have been taken into account in this LCA, and in accordance with EN15804+A2:2019. The study covers at least 95% of the materials and energy per module and at least 99% of the total use of materials and energy of each unit process. Long term emissions have been excluded from the study.
LCI Method Principle
LCI Method Approaches
No records found.
Completeness of product model
No statement
Reviews
  • Independent external review by
License and access conditions
Copyright
yes
License type
Free of charge for all users and uses
Access information
None
Owner of data set
Altherm ICF Ltd
Technical purpose
This EPD is for the Altherm ICF block system for multi-storey blocks and commercial buildings. The installed system comprises two insulating EPS panels (75mm thick) connected by high strength polypropylene webs. These webs maintain a core thickness between the EPS panels of 200mm, where the concrete is poured. They are pre-assembled at the Altherm production site in Swords, Co. Dublin. The internal hollow core of 200mm is filled on-site with readymixed concrete. This EPD covers only the insulation product manufactured by Althem. it does not cover the impacts of the ready mixed concrete used as the infill n the ICF system. The Altherm 350mm ICF EPS products are used in the construction of ground floor level and basements in housing construction. Altherm Insulating Concrete Formwork Systems are manufactured in compliance with the Irish Building Regulations 1997–2024 for structure, fire, sound, moisture, durability, and conservation of fuel and energy when used as specified, and is certified under NSAI Agrément Certificate 20/0415.
Input Products
No records found.
Co-Products
No records found.
Data set version
00.03.000
Time stamp (last saved)
2026-01-05T16:20:10
Data set format
Compliance systems
  • EN 15804+A2 (Overall compliance: Fully compliant)
  • ISO 14025 (Overall compliance: Fully compliant)
  • ISO 21930 (Overall compliance: Fully compliant)
Tag
Data Set deregistration
Are you sure you want to deregister selected dataset?
Please enter the reason of deregistration and confirm.