Process data set overview page

Data set: Exoperm Mono SA (00.03.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name Exoperm Mono SA

Location IE

Reference year 2022

Valid until 2027

Reference flow(s) Exoperm Mono SA - 1.0 * 1.0 qm (Area)

Type EPD

Parameterized? no

LCIA results included? yes

Category

Synonyms

Use advice for data set This LCA covers the Product (A1 - A3), Construction Process (A4 - A5), end of Life (C1 - C4), and benefits and loads beyond the system boundary (D).

Data set use approval

General comment The dataset is representative for the production processes used in 2019, in the countries of production: Finland and France. The data Quality Level, according to Table E.1 of EN 15804 +A2, Annex E, is as follows: Geographical representativeness: Very Good. Technical representativeness: Good. Time representativeness: Very Good. Allocation of energy and electricity types and amounts to the various manufacturing processes has been provided by the manufacturers along with production waste. Allocation of impacts to the products is based on the product composition mass. Flows related to human activities such as employee transport are excluded. The construction of capital assets such as buildings, manufacture of machines and transportation systems are also excluded since the related flows are assumed to be negligible compared to the manufacture of the building material when compared to these systems over a full lifetime of operation. The cut-off criteria of section 6.3.6 of EN15804:2012+A2:2019 have been followed, where 99% of the total energy and materials are included, and the total neglected input flows for the modules reported on in the LCA are less than 5% of the energy usage and mass.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Chris Foster, EuGeos Limited

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Partel

Technical purpose This EPD is for Partel's EXOPERM MONO SA 250 (self-adhesive) breathable Monolithic membrane. The raw materials are predominantly polyester elastomer bonded to a non-woven or scrim, with a small amount of ink printing on the surface, to ensure correct installation, and adhesive (in the case of the EXOPERM MONO SA 250 self-adhesive product). EXOPERM MONO 150 provides the building structures with superb protection and yet providing high breathability with an SD value of 0.07m. It's Monolithic TPE layer creates a complete wind tight, waterproof, breathable membrane that actively expels any water or humidity. EXOPERM MONO SA 250 is an advanced vapour permeable self-adhesive membrane developed based on proven Monolithic Technology. It provides an air and vapour barrier with excellent adhesion for the roof, wall and floor applications. The integrated self-adhesive technology ensures membrane performance, without impacting its breathability function, facilitating primerless, continuous air and windtight connections that withstand damp conditions, without requiring fixings. EXOPERM MONO SA 250 technical data: SD Value : 0.26m Nail Tear Resistance MD/CD: 180 / 200N Tensile Strength MD/CD: 265 / 155N / 50mm Vapour Resistance: 13 US PERMS UV Resistance: 4 Months The function of both of these products is to act as an exterior breather membrane. Both membranes use Monolithic TPE technology to expel any water or humidity out from the buidling. They can be used for roofs and walls appplication, and are also suitable for ceiling and floor timber structures as temporary protection during the contruction phase. Ideal installation on timber structures, CLT elements, OSB, Steel or concrete, masonry-type substrates. They are an effective solution for all insulation types. The membranes are manufactured by applying a non-woven or scrim onto a polyethylene elastomer sheet substrate, to form a laminated sheet membrane. Adhesive is also added to the surface (for the SA product), and one surface is printed with ink.

Input Products No records found.

Co-Products No records found.

Data set version 00.03.000

Time stamp (last saved) 2023-06-13T17:12:30

Data set format

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo